Misfeed In The Transport Area, Fusing Area, And Exit Area - Sharp AR-3551 Operation Manual

MISFEED REMOVAL

Misfeed in the transport area, fusing area, and exit area

CAUTION
The fusing unit is hot. Take care in removing paper.
(Do not touch the metal parts.)
1
Unlatch the duplex module and slide it to
the left.
2
Remove the misfed paper as shown in the
illustrations below.
Roller rotating knob A
NOTE
Transfer roller
Photoconductive drum
4-6
Unlatch the module and
gently move the module
away from the machine.
If the machine is not
equipped with a duplex
module, open the side
cover similarly.
If paper is misfed in the
transport area, turn roller
rotating knob A in the
direction of the arrow to
remove the misfed paper.
Do not touch or damage
the transfer roller.
Do not touch or damage
the photoconductive
drum.
Roller rotating knob B
CAUTION
The fusing unit is hot. Take care in removing paper.
(Do not touch any metal parts.)
Fusing unit open tab
3
Gently close the duplex module.
If paper is misfed in the
fusing area, turn roller
rotating knob B in the
direction of the arrow to
remove the misfed paper.
If the misfed paper is
inside the fusing area,
turn down the fusing unit
open tab to open the
fusing unit and remove
the misfed paper.
If paper is misfed in the
exit area, remove it as
shown while taking care
not to tear the paper.
If the duplex module is
equipped with an exit tray
and paper is misfed in the
exit area, remove the
misfed paper as shown in
the illustration.
If the machine is not
equipped with a duplex
module, close the side
cover.
After closing, confirm that
the misfeed message has
been cleared and the
normal display appears.