Setting Items - Sharp AR-3551 Operation Manual

6
Press the [OK] key.
When the machine is being operated from the touch panel on a scanner module:
1
Press the [CUSTOM SETTINGS] key when
the printer screen is displayed to display
the custom settings menu screen.
2
Touch the key of the desired item to display
its setting screen.
CUSTOM SETTINGS
DISPLAY
TOTAL COUNT
CONTRAST
ADDRESS
RECEIVE MODE
TRAY SETTINGS
CONTROL
KEY OPERATOR PROGRAMS
Detailed descriptions for custom settings start on
the next page.
CUSTOM SETTINGS
TRAY SETTINGS
TYPE / SIZE
TRAY 1 PLAIN / 8 X11 1 /
2
TRAY 2 PLAIN / AUTO-INCH
TRAY 3 RECYCLED / AUTO-INCH
Depending on the setting item, additional item
setting keys may be displayed and page switching
keys may be displayed.
Check mark boxes are touch keys that show the
status of selections. A box with a check mark means
the function is "on" (enabled) and an unchecked box
means the function is "off" (disabled). Alternate
touches of a box will change the on/off status.
" " will be displayed to
the right of selected item,
and the setting will be reg-
istered. Depending on the
setting item, additional
item selection and regis-
tration operation may be
needed. In this case, use
the or key to select
an item and press the
[OK] key to register it. To
set another item, press
the [BACK/C] key and
repeat steps 5 and 6.
Any print jobs held in the
printer and any job
currently transmitted to
the printer will be printed
in the former custom
setting conditions.
LIST PRINT CLOCK
FAX DATA
FORWARD
OK
PRINT COPY FAX
1/2
CUSTOM SETTINGS
7
When setting is complete, press the
[MENU] key to return to the basic screen.
NOTE
If the [BACK/C] key is pressed after each setting
is complete, the display that has called the setting
will appear again. If selection of a number is
mistaken during setting operation, press the
[BACK/C] key to correct the selected number.
3
Touch the desired setting on the setting
screen of the desired item and touch the
[OK] key.
CUSTOM SETTINGS
TRAY SETTINGS
TYPE / SIZE
TRAY 1 PLAIN / 8 X11 1 /
2
TRAY 2 PLAIN / AUTO-INCH
TRAY 3 RECYCLED / AUTO-INCH
To set another item, repeat steps 2 and 3.
4
To finish the setting operation, touch the
[EXIT] key.
CUSTOM SETTINGS
DISPLAY
LIST PRINT
TOTAL COUNT
CONTRAST
ADDRESS
RECEIVE MODE
TRAY SETTINGS
CONTROL
KEY OPERATOR PROGRAMS
OK
PRINT COPY FAX
1/2
CLOCK
FAX DATA
FORWARD
3-7
3