Key Operator Programs; Key Operator Program List - Sharp AR-3551 Operation Manual

KEY OPERATOR PROGRAMS

KEY OPERATOR PROGRAMS
This chapter describes the key operator programs concerning printer features and other programs common to printer,
copier and facsimile features. These programs are provided for use by the key operator. For key operator programs
specific to copier, facsimile or network scanner features, see the separate operation manuals for these features. Key
operator programs can only be accessed after a key operator code number has been entered.
The titles displayed on the touch panel are shown with { }.
NOTE
The key operator programs that can be accessed depend upon how the product is configured with optional equipment.

Key operator program list

Program name
Account control
Auditing mode
Print per account {Total pages per account} 6-7
Reset account {Resetting account}
Account number control
No print if ACC'T # invalid
{Cancel jobs of invalid accounts}
Energy save
Auto power shut-off timer
Auto power shut-off
Preheat mode {Preheat mode setting} 6-8
Toner save
{Toner save in printer mode}
Operation panel settings
{Operation settings}
Auto clear setting
Message display time
{Message time settings}
Disabling of bypass printing
{Disabling of bypass printing}
Language setting
{Display language settings}
{Keys touch sound}
{Disabling of job priority operation}
Device settings {Device control}
Disable duplex unit
{Disabling of duplex}
Disable stapler unit
{Disabling of stapler}
Disable paper desk drawers
{Disabling of optional paper drawer}
Disable finisher {Disabling of finisher} 6-10
Disable mail-bin stacker
{Disabling of mail-bin stacker}
Saddle stitch adjust
{Saddle stitch position adjust}
High speed stacking
Rotated output
6-2
Print key operator programs list
Page
{List print}
Key operator code change
6-7
System settings {Print settings}
Default settings
6-7
Print density level
6-7
Disable notice page printing
{Prohibit notice page printing}
6-7
Disable test page printing
6-8 {Prohibit test page printing}
6-8 A4/LT auto select
{A4/letter size auto change}
Interface settings
6-8 Hexadecimal dump mode
PDL for parallel port
{Parallel port emulation switching}
6-9 PDL for network port
{Network port emulation switching}
6-9 I/O timeout
Port switching
6-9 {Port switching method}
Network settings
6-9 IP address setting
6-9 Enable TCP/IP
6-9 Enable NetWare
Enable EtherTalk
Enable NetBEUI
Reset the NIC
6-9
Initialize/store settings
{Initialize and/or store settings}
6-9
Restore factory defaults
Store current configuration
6-9
Restore the configuration
{Restore configuration}
Product key
6-10
PS3 expansion kit
{Network scanner expansion kit}
6-10
E-mail alert and status
6-10
{Printer expansion kit}
6-10
6-10
6-11
6-11
6-11
6-11
6-11
6-12
6-12
6-12
6-12
6-12
6-13
6-13
6-13
6-13
6-13
6-13
6-14
6-14
6-14
6-14
6-14
6-14
6-14