Sharp AR-3551 Operation Manual page 47

8
Verify that the desired number of copies is
set.
COPIES
10SET
9
Press the [OK] key.
● Printing will start. If printing of another job is being
executed, however, your job will be registered as
a print job. Printing of the job will start after
preceding jobs are completed.
10
Operation is now complete.
To continue operation, repeat steps 1 to 9.
When the machine is being operated from the touch panel on a scanner module:
1
Press the [PRINT] key to display the printer
basic screen.
2
Select the desired data.
PRINT HOLD JOB LIST
SHARP001
SHARP002
SHARP003
SHARP004
3
Use the [Numeric] keys to enter the 5-digit
password.
(needed only if a password has been set)
ENTER PIN VIA THE 10-KEY.
CANCEL
NOTE:
Each time a number is entered, "–" will change to " ".
The number of copies can
be changed by using the
or key on the
operation panel.
To switch the screen,
touch the or key.
Be sure to enter the
password that has been
entered on the computer.
If no password has been
set, operation of this step
is not needed.
4
Ensure that the desired number of prints
is set.
NUMBER OF PRINTS
PRIN
(1 999)
1
PR
5
Execute printing.
CANCEL
PRINT AND DELETE THE DATA
DELETE
PRINT AND SAVE THE DATA
6
Operation is now complete.
JOB CONTROL
The number of prints can
be changed by using the
or key.
To delete the print data
after completing the print
job, touch the [PRINT
AND DELETE THE DATA]
key. To keep the print data
after printing, touch the
[PRINT AND SAVE THE
DATA] key. To cancel
printing and clear the print
data, touch the [DELETE]
key.
● If you select execution of
the print job, printing will
start. If printing of
another job is being
executed, your job will
be registered as a print
job. Printing of the job
will start after preceding
jobs are completed.
2-11
2