Table of Contents
Advertisement
MIDI: Filters
Use this page to set up to 8 filters for the MIDI data received or
sent by the Pa2X on the MIDI and USB Device ports.
Midi In Filters
Selected MIDI IN filters.
Off
No filter.
Pitch Bend
Pitch Bend.
MonoTouch Mono (or Channel) After Touch.
PolyTouch
Poly After Touch.
PrgChange
Program Change.
SysExcl
System Exclusive.
All CC
All Control Change messages.
0...127
Control Change message #0...127. See "MIDI
Data" on page 324 for a list of available Control
Change messages.
Notes
Note events.
Midi Out Filters
Selected MIDI OUT filters. See above for information on each
filter type.
Audio Setup: Style/Kbd
This page lets you connect Style, Keyboard and Pad tracks to the
audio outputs.
Tracks
Mid
Use these parameters to assign an audio output (OUTPUT sec-
tion, on the back of the instrument) to each track.
Left + Right
The selected track is connected to the Left &
Right outs, in stereo. The track is also sent to the
Internal FX processors (A and B for the Style and
Pad tracks, C and D for the Keyboard tracks). You
can set the volume using the MASTER VOLUME
slider.
Track
Internal FX
The track is also sent to the S/PDIF Digital Out.
However, the MASTER VOLUME slider has no
Mid
effect on this output.
Out 1 + 2
The track is connected to the 1 & 2 sub-outs, in
stereo. It is not sent to the Internal FX processors.
The MASTER VOLUME slider has no effect on it.
Track
Internal FX
The track is not sent to the S/PDIF Digital Out.
Out 1
The selected track is connected to the sub-out 1.
It is mixed to mono. It is not sent to the Internal
FX processors. The MASTER VOLUME slider has
no effect on it.
Track
Internal FX
The track is not sent to the S/PDIF Digital Out.
Global edit mode
231
MIDI: Filters
Gbl
Advertisement
Table of Contents
