Table of Contents
Advertisement
172
Song Play operating mode
Mixer/Tuning: FX Send
Use the TRACK SELECT button to switch from the Keyboard to
the Song tracks, and vice versa.
Upper Volume Link
This parameter allows you to define if changing the volume for
one of the Upper tracks, proportionally changes also the volume
for the other Upper tracks.
To save this parameter status, go to the Style Play mode, then
select the Write Global-Style Play Setup from the page menu (see
"Write Global-Style Play Setup dialog box" on page 113).
Note: This parameter is the same you can find in the "Preferences:
Style Play Setup" page of the Style Play mode (see page 110).
On
When changing volume to one of the Upper
tracks, volume for the other Upper tracks
changes in proportion.
Off
When changing volume to one of the Upper
tracks, only that track's volume is changed. Other
Upper tracks are left unchanged.
Dry
Use this checkbox to turn the dry (direct) track signal on or off.
Note: If the track is sent to a separate output, no FX is sent to any
output. To program the output status for each track, see "Audio
Setup: Player 1" and "Audio Setup: Player 2" on page 232.
On
When checked, the direct, dry signal is sent to the
output, mixed with the FXs.
Track
Off
When unchecked, the direct, dry signal is
removed from the audio output, and only sent to
the FXs. The effected signal will still be panned
(in stereo FXs only) according to the Pan value.
Track
Pan
Track position in the stereo field.
-64...-1
Left stereo channel.
0
Center.
+1...+63
Right stereo channel.
Volume
Track's volume.
0...127
MIDI value of the track's volume.
Play/Mute icon
Track's play/mute status. See "Keyboard track status" on
page 162 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Sty
Mixer/Tuning: FX Send
This page lets you set the level of the track's direct (uneffected)
signal going to the Internal FX processors.
Note: Song parameters cannot be saved when saving to a Perfor-
mance or STS.
The effect processors included in Pa2X are connected in parallel,
so you can decide which percentage of the direct signal can be
effected:
In case you want to send all of a track's signal to the effect (as
when using "insert" effects, like Rotary, Distortion, EQ...), just
set the Dry parameter to Off (see "Dry" above):
There are four Internal FX processors in Song Play mode. Usu-
ally, they are arranged as follows:
FX A
Reverb processor for Player 1 and 2.
FX B
Modulating FX processor for Player 1 and 2.
FX C
Reverb processor for Keyboard tracks.
FX D
Modulating FX processor for Keyboard tracks.
Out L/R
FX Processor
Out L/R
FX Processor
Sng
Advertisement
Table of Contents
