Table of Contents
Advertisement
48
Selecting and playing Styles
Tempo
Tempo
While a Tempo setting is saved with each Style or Performance, you can change it to be whatever you
like. You can use either of the following two methods.
•
While the Tempo parameter is selected, use the TEMPO/VALUE controls to
change its value.
•
When the Tempo parameter is not selected, or you are in any other page,
keep the SHIFT button pressed, and use the DIAL to change the Tempo.
The selected tempo will be shown in a small window.
•
Press the UP and DOWN buttons at the same time to recall the saved
Tempo.
Intro, Fill, Variation, Ending
When playing Styles, you can select various "Style Elements" to make your playing richer. A Style is
made of up to four basic patterns (Variations), three Intros (or two Intros and a Count-In), three Fills
(or two Fills and a Break), and three Endings.
1
Make sure the SYNCHRO-START LED is turned on (otherwise, press the
button to turn it on).
2
Press one of the INTRO buttons to set the corresponding Intro to play.
i
Hint: As an alterna-
tive to using the TEMPO/
VALUE controls, hold the
Tempo value in the dis-
play, then move your fin-
ger up/down or left/
right.
Advertisement
Table of Contents
