Table of Contents
Advertisement
208
Sequencer operating mode
Mixer/Tuning: EQ Control
Mixer/Tuning: EQ Control
This page lets you reset or bypass track equalization, pro-
grammed in the previous page.
Use the TRACK SELECT button to switch between Song tracks
1-8 and 9-16, and vice-versa.
Track Reset buttons
Use these buttons to reset (i.e., "flatten") equalization for the
corresponding track.
Reset All Tracks button
Touch this button to reset (i.e., "flatten") equalization for all
tracks.
Bypass
Check any of these checkboxes to bypass equalization for the
corresponding track. When bypassed, equalization has no effect
on the track, but all parameters are preserved. When the box is
unchecked, equalization is activated again with the original set-
tings.
On
The bypass function is engaged, so no equaliza-
tion is active on the corresponding track.
Off
The bypass function is not engaged, so the equal-
ization is active on the corresponding track.
Input Trim
This knob allows you to limit the level of the signal passing
through the equalizer. Extreme equalization values can overload
the audio circuits and lead to distorsion. This control lets you set
equalization as desired, and at the same time avoid overloading.
0...99
Limiting value. The higher, the most effective it
is.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Mixer/Tuning: Tuning
Parameters
See "Mixer/Tuning: Tuning" on page 99.
Mixer/Tuning: Sub Scale
This page lets you program an alternative scale for the selected
tracks (via the "Track Assign" parameter).
tracks (if any) use the basic scale set in Global mode (see
"Main Scale" on page 222).
Note: Quarter Tone selection and activation of the Sub-Scale on
each track of a Song, can be received by MIDI (i.e., by an external
sequencer or controller). Conversely, selection of Quarter Tone set-
tings, or activation of the Sub-Scale on each track of the Song, can
be sent by the Pa2X to an external MIDI recorder as System Exclu-
sive data.
Parameters
See "Mixer/Tuning: Sub Scale" on page 99.
Track Assign
Check the parameter corresponding to each track where the
Sub-Scale must be used.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
The remaining
Advertisement
Table of Contents
