Touch Panel Calibration; Page Menu - Korg pa2X pro User Manual

Professional arranger
Hide thumbs Also See for pa2X pro:
Table of Contents

Advertisement

236
Global edit mode

Touch Panel Calibration

Touch Panel Calibration
From time to time (for example, after loading a new operating
system), calibrating your Color TouchView™ display may be
necessary to make pointing more precise. If so, use this page.
1.
When in this page, first touch exactly inside the set of
arrows in the upper left corner of the display.
2.
The arrows will subsequently move to the other corners of
the display. Touch exactly inside them.
3.
Finally, touch Save to confirm the new calibration.
In case you want to exit and cancel the calibration, press
EXIT before completing the procedure.
Hint: To quickly reach this page from any other page, press GLO-
BAL to enter the Global mode, then press it again and keep it
pressed, until this page appears.

Page menu

Touch the page menu icon to open the menu. Touch a command
to select it. Touch anywhere in the display to close the menu
without selecting a command.
Note: In each Global page, the only available Write Global options
from the page menu are the ones relevant to the content of the cur-
rent page. All other Write Global options are greyed out.
Write Global-Global Setup
Select this command to open the Write Global-Global Setup dia-
log box, and save global settings that are not tied to a single
operative mode. These settings are programmed in the Global
edit mode.
See "Write Global - Global Setup dialog box" on page 237 for
information on the dialog box.
Write Global-Midi Setup
Select this command to open the Write Global-Midi Setup dia-
log box, and save the current MIDI settings to a MIDI Setup.
See "Write Global - Midi Setup dialog box" on page 237 for
more information.
Write Global-Talk Configuration
Only available when the Talk is activated. Select this command to
open the Write Global-Talk Configuration dialog box, and save
the current Talk settings (see "Voice Processor Setup: Talk" on
page 240).
See "Write Global - Talk Configuration dialog box" on page 237
for more information.
This parameter is automatically set to off when turning the instru-
ment off.
Write Global-Voice Processor Setup
Select this command to open the Write Global-Voice Processor
Setup dialog box, and save the current Voice Processor Setup set-
tings (see from page 235).
See "Write Global - Voice Processor Setup dialog box" on
page 237 for more information.
Write Global-Voice Processor Preset
Select this command to open the Write Global-Voice Processor
Preset dialog box, and save the current Voice Processor Preset
settings (see from page 241).
See "Write Global - Voice Processor Preset dialog box" on
page 238 for more information.

Advertisement

Table of Contents
loading

Table of Contents