Table of Contents
Advertisement
Filter...
Touch this button to open the Filter dialog box, and select one or
more filter criteria, to show a restricted set of entries in the main
list.
Touch the
(Text Edit) button next to the search criteria you
want to edit (Name, Genre, or Artist). You can also select a
Meter, or a range of Tempo values.
Touch the Clear button next to the search criterion you want to
delete or set to a default value.
Touch Clear All to reset all search criteria.
Add to list
If the "Enable List Edit" command is selected in the page menu,
the "Add to list" button becomes available, to let you add entries
to the selected Custom List.
Select an entry, then touch this button to add the selected entry
to the current Custom List (see "Custom List" on page 189).
Select
Touch this button to confirm selection of the highlighted entry
in the main list. After touching this button, the name of the
selected entry appears in the left upper corner of the display
("N:").
When you highlight a song in any of the SongBook lists, its name
appears in reversed text, over a dark-blue background. While in
this situation, the song is highlighted, but not yet loaded.
When you touch the Select button in the display, the song will be
loaded. The blue background turns to green, and the text is
turned to boldface, to show the Song has been loaded and ready
to play.
To start playback of the Song or Style, press (respectively) either
the PLAY or START button.
Numeric selection of entries
When in SongBook mode, you can select a SongBook entry by
means of an unique number. Numbers associated with each
entry can be programmed in the Book Edit 2 page (see "Book
Edit 2" on page 188).
To see the numbers while in the Book page, select the "Show
Song Numbers (now Key)" command from the page menu:
After you select this command, the "Num" column appears:
To see the "Key" column again, select the "Show Key (now Song
Numbers)" command from the page menu.
To select a SongBook entry by entering its number, press the
SONGBOOK button again while you are in any page of the
SongBook mode. The numeric keypad will appear, allowing you
to enter the number corresponding to the desired entry.
Hint: You can export a list of SongBook entries in TXT format,
including the assigned selection number. You can print this list on
paper as a memo. (See "Export as text file" on page 192).
Selecting SongBook entries via MIDI
SongBook entries can be selected via MIDI (through the special
Control channel), by using the NRPN dedicated Control Change
messages #99 (MSB, with value 2) and #98 (LSB, with value 64).
See "Selecting SongBook entries via MIDI" on next page.
Setting the special Control MIDI channel
First of all, go to the Global > MIDI > Setup/General Control
page and select a MIDI Setup to be used when you will remotely
select SongBook entries.
Then go to the Global > MIDI > Midi In Channel page, to assign
a MIDI channel to the special Control channel. Assign the Con-
trol option to one of the sixteen available MIDI channels (usu-
ally one of the higher-numbered ones).
When done, save this setting to the current MIDI Setup by
choosing the "Write Global-Midi Setup" command from the
page menu.
If you plan to use a different MIDI channel for the Style Play and
Song Play modes, repeat the above to create a second MIDI
Setup.
SongBook
185
Book
Advertisement
Table of Contents
