Korg pa2X pro User Manual page 229

4. You will be asked if you want to save the Global, and select
the new language. Touch Yes to confirm. The Global will be
automatically saved, and the language selected.
5. A message will advice you to reboot the Pa2X. Touch OK to
close the message window.
6. Turn the Pa2X off, then on again.
Background color
Color
Use this parameter to choose a different background color for
the display. Possible choices are indicated as numbers.
Balance slider as the Acc/Seq-RT Volume
Balance Slider
The BALANCE slider can either be used to mix between the Key-
board and Accompaniment/Song tracks, or to control the
Accompaniment/Song Volume without changing the Keyboard
tracks. This is always a relative control, whose effective maxi-
mum value is determined by the MASTER VOLUME slider posi-
tion.
Note: The BALANCE slider only works in Style Play and Song Play
modes. It does not work in Sequencer or Sound mode.
Acc/Sng - RT/Kbd Balance
While in Style Play and Song Play mode, the
BALANCE slider balances the volume of the Key-
board (RT/Kbd) tracks, against the Style (Accom-
paniment), Pad and Song tracks.
Acc/Sng Volume
While in Style Play and Song Play mode, the
BALANCE slider controls the volume of the Style
(Accompaniment), Pad and Song tracks.
Program Change
Show Program Change number
Check this parameter to show Program Change numbers next to
Sound names in the Sound Select window. By default, this
parameter is turned on.
Note: Program Change numbers are always shown in Sound Edit
mode, and in the various Track Info areas.
Track Activity
Show Track Activity
Use this parameter to turn on/off the Track Activity display.
When it is turned on, you can monitor events coming from the
tracks or the MIDI inputs. Incoming events are shown by the
changing color of each track's label.
Gbl
Here is the list of colors and their meaning:
Red Data coming from the MIDI IN ports.
Green Internal data, generated by the keyboard, pads,
the Arranger or one of the Players.
Gbl
Grey Either internally or externally generated data (or
both at the same time).
Dark Blue No data received.
Auto Select
Auto Style Select
Auto Performance/Sound Select
When one of these parameters is checked, the latest selected
Style, Performance or Sound selected in a bank is immediately
selected when pressing the bank button.
This way, you can assign your preferred Style, Performance or
Sound to each control panel's button, and select it just with a
single press.
However, the Style/Perf/Sound Select window still appears when
you press one of the bank buttons, so you can select a different
item if desired.
Note: Unless you save your settings by means of the "Write Global-
Auto Select Setup" page menu command, the memorized Style,
Performance or Sound is reset to the first one in each bank, when
turning the instrument off and then on again.
Gbl
Hint: You can save your preferred Performances into the first loca-
tion of each bank. This way, by turning on this parameter, you will
select your preferred Performance at the touch of a single button.
Also note that, by turning the "Factory Style and Pad Protect"
parameter off, you can do the same with the Styles.
Global edit mode
General Controls: Interface
225
Gbl
Gbl
Gbl