Song Edit: Rx Convert; Preferences: Sequencer Setup - Korg pa2X pro User Manual

Song Edit: RX Convert

You can use the RX Convert page to convert notes of the midifile
into RX Noises, and vice-versa. This will help programming
Songs on an external sequencer.
After having chosen a track to convert, touch Execute to com-
plete the operation.
Track
Use these parameters to select the track containing the notes or
RX Noises you want to convert.
RX Note Velocity
Use this parameter to adjust the volume level of the RX Noises in
the selected track(s).
Add RX Noises to Guitar track
Use this parameter to automatically analyze the Standard MIDI
File, and add RX Noises to Guitar tracks. This command scans a
single track or the whole Standard MIDI File, looking for guitar
strummings played by nylon, steel or electric guitars.
After scanning, a suitable Guitar sound will be automatically
assigned to the relevant tracks, and RX Noises automatically
added where needed.
This means that you can transform any flat SMF into an ultra-
realistic song with a real guitar player inside – at the touch of a
button!
Sequencer operating mode

Preferences: Sequencer Setup

In this page, you can select a MIDI Setup and the Harmony track
for the Sequencer mode.
Note: These settings are stored in the Sequencer Setup area of the
Global file. (Parameter of this kind are marked with the
abbreviation through the manual). After changing these settings,
select the Write Global-Sequencer Setup command from the page
menu to save them to the Global.
Midi Setup
MIDI channels for the Sequencer mode can be automatically
configured by selecting a MIDI Setup with this parameter. See
"MIDI Setup" on page 228 for more information on using MIDI
Setups.
Note: To automatically select a MIDI Setup when entering the
Sequencer mode, select the Write Global-Sequencer Setup com-
mand from the page menu.
For detailed information on preloaded MIDI Setup settings, see
"MIDI Setup" on page 319.
Note: After selecting a MIDI Setup, you can go to the Global mode
and apply any change to each channel setting. To store these
changes to a MIDI Setup, while still in Global mode select the Write
Global-Midi Setup command from the page menu. All MIDI Set-
ups can be freely customized and overwritten.
Hint: To restore the original MIDI Setups, load the original Fac-
tory data again (available in the supplied Accessory CD, or down-
loadable from www.korgpa.com).
Harmony Track
The Voice Processor gets the chord notes from the track selected
with this parameter.
Hint: Go to the Voice Processor Preset section of the Global mode to
try different Voice Processor Presets while creating or editing a
Song.
Off No track sends notes to the Harmony module of
the Voice processor. Chords can still be received
from the MIDI IN.
Ply.1-Track 1...16
Chords are sent from one of Player 1 tracks.
215
Song Edit: RX Convert
Seq
Seq
Seq