Song Edit: Cut/Insert Measures; Song Edit: Delete - Korg pa2X pro User Manual

After setting the various parameters, touch Execute to start the
operation.
Track
Use this parameter to select a track.
All All tracks selected.
Track 1...16 Selected track.
Value
Velocity change value.
Start / End Tick
Use these parameters to set the starting and ending points of the
range to edit.
If you wish to select a four-measure sequence starting at the
beginning of the Song, the Start will be positioned at 1.01.000,
and the End at 5.01.000.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to edit. If you select the same note as the Bottom and Top
parameters, you can select a single percussive instrument in a
Drum track.
Advanced
When this checkbox is checked, the "Intensity", "Curve", "Start
Velocity Value" and "End Velocity Value" parameters can be
edited.
Intensity
(Only available in Advanced mode). Use this parameter to specify
the degree to which the velocity data will be adjusted toward the
curve you specify in "Curve".
0...100% Intensity value. With a setting of 0 [%], the veloc-
ity will not change. With a setting of 100 [%], the
velocity will be changed the most.
Curve
(Only available in Advanced mode). Use this parameter to select
one of the six curves, and to specify how the velocity will change
over time.
Start Value = 0%, End Value = 100%
Curve 1
127 127
Velocity Velocity
1 1
Start End Start
Value Value Value
Curve 4
127 127
Velocity Velocity
1 1
Start End Start
Value Value Value
Start / End Vel. Value
(Only available in Advanced mode). Velocity change at the start-
ing and ending ticks of the selected range.
0...100 Velocity change in percentage.
Curve 2 Curve 3
127
Velocity
1
End Start End
Value Value Value
Curve 5 Curve 6
127
Velocity
RANDOM
1
End Start End
Value Value Value
Sequencer operating mode

Song Edit: Cut/Insert Measures

Song Edit: Cut/Insert Measures
In this page you can cut or insert measures from the Song.
After selecting the Start and Length parameters, touch Execute
to start the operation.
After the Cut, the following measures are moved back, to fill the
cut measures.
After the Insert, the following measures are pushed forward to
accommodate the inserted measures.
Start
First measure where to begin cutting/inserting.
Length
Number of measures to be cut/inserted.
Meter
Meter (time signature) of the measures to be inserted.

Song Edit: Delete

This page is where you can delete MIDI events from the Song.
After setting the various parameters, touch Execute to start the
operation.
Track
Use this parameter to select a track.
All All tracks selected.
Track 1...16 Selected track.
Master Master track. This is where the Tempo, Scale and
Effect events are recorded.
213