Selecting Elements; Sound Select Window; Performance Select Window - Korg pa2X pro User Manual

82

Selecting elements

Sound Select window

Selecting elements
The following windows are shown in the various operating
modes, whenever you try to select a Sound, Performance, Style
or Song.
Sound Select window
Touch the Sound area whereas it appears in the display, or one of
the SOUND SELECT buttons on the control panel (provided the
SOUND SELECT LED is lit), to open the Sound Select window.
Use the SOUND SELECT buttons to go directly to the selected
bank.
Press EXIT to exit from this page and go back to the previous
page without selecting any Sound.
Bank sets Side tabs (banks)
Lower tabs (pages)
Note: Depending on the status of the "Auto Performance/Sound
Select" parameter (see page 225), a Sound may be immediately
selected when pressing one of the SOUND SELECT buttons. The
latest selected Sound for that bank will be selected.
Bank sets
Selected set of banks (top or bottom row of Factory Styles, User
banks).
Side tabs (banks)
Use these tabs to select a bank of Sounds. Each tab corresponds
to one of the SOUND SELECT buttons on the control panel.
Lower tabs (pages)
Use these tabs to select one of the available pages in the selected
bank.
If you press again the same PERFORMANCE/SOUND SELECT
button on the control panel, the next page in the same bank is
selected. This way, you do not need to touch one of the corre-
sponding tabs in the display in order to select a different page.
Previous/Next tabs
Scroll the lower tabs to the left or the right, when additional tabs
are available but cannot be seen in the display.
Sounds
If more than four pages are
available, the Previous/Next tabs
are shown in this area
Sounds
Touch one of these buttons in the display to select a Sound.
Unless the DISPLAY HOLD LED is turned on, the window auto-
matically closes short after you select a Sound.
Program Change
Program Change number. Shown only when the "Show Program
Change number" parameter is turned on in Global mode. (See
page 225).

Performance Select window

Touch the Performance area whereas it appears in the display, or
one of the PERFORMANCE SELECT buttons on the control
panel (provided the PERFORMANCE SELECT LED is lit), to
open the Performance Select window. Use the PERFORMANCE
SELECT buttons to go directly to the selected bank.
Press EXIT to exit from this page and go back to the previous
page without selecting any Performance.
Bank sets Side tabs (banks)
Lower tabs (pages)
Note: Depending on the status of the "Auto Performance/Sound
Select" parameter (see page 225), a Performance may be immedi-
ately selected when pressing one of the PERFORMANCE SELECT
buttons. The latest selected Performance for that bank will be
selected.
Bank sets
Selected set of banks (top or bottom row of Performances).
Side tabs (banks)
Use these tabs to select a bank of Performance. Each tab corre-
sponds to one of the PERFORMANCE SELECT buttons on the
control panel.
Lower tabs (pages)
Use these tabs to select one of the available pages in the selected
bank.
If you press again the same PERFORMANCE/SOUND SELECT
button on the control panel, the next page in the same bank is
Perfor-
mances