Table of Contents
Advertisement
104
Style Play operating mode
Track Controls: Easy Edit
Reset All Tracks
Touch this button to reset all changes to percussive instrument
volumes in all tracks.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
How to adjust volume for a single Drum
Family
Here is a quick example of the use of the Drum Volume func-
tion.
1.
While in this page, press TRACK SELECT to see individual
Style tracks.
2.
Touch the Select button, in the display, above the Drum
track.
3.
Press START/STOP to let the Style go.
4.
While listening to the Style, select the Snare knob, and use
TEMPO/VALUE controls to turn the volume completely
off.
You'll notice how all snares stops sounding.
5.
Touch the Reset Track button in the display to recall the
original snare volume.
Track Controls: Easy Edit
In this page you can edit the main parameters of the Sounds
assigned to each track.
Note: All values refer to the value of the original Sound.
Easy Sound Edit
Use these knobs to adjust the offset value.
-64...0...+63 Offset value. '0' means no change to the original value
memorized in the Sound, while any other value
Sty
means a decrease or increase to the original value.
Sound parameters
Attack
Decay
Release
Cutoff
Resonance
LFO Depth
LFO Speed
LFO Delay
Select
Use these buttons to select the track to edit. The button corre-
sponding to the selected track turns green.
Reset Track
Touch this button to reset all changes to Sound parameters in the
selected track.
Reset All Tracks
Touch this button to reset all changes to Sound parameters in all
tracks.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
How to adjust sound parameters for a sin-
gle Sound
Here is a quick example of the use of the Easy Sound Edit func-
tion.
1.
If needed, while in this page press TRACK SELECT to see
Keyboard tracks.
2.
Touch the Select button, in the display, above the Upper 1
track.
3.
While playing on the keyboard to hear the Sound, select the
Cutoff knob, and use TEMPO/VALUE controls to turn its
value completely off.
You'll notice how the filter progressively cuts out high fre-
quencies, making the sound darker and mellower.
4.
Touch the Reset Track button in the display to recall the
original Cutoff value.
Meaning
Attack time. This is the time during which the
sound goes from zero (at the moment when
you strike a key) to it's maximum level.
Decay time. Time to go from the final Attack
level to the beginning of the Sustain.
Release time. This is the time during which the
sound goes from the sustaining phase, to zero.
The Release is triggered by releasing a key.
Filter cutoff. This sets the sound brightness.
Use the Filter Resonance to boost the cutoff
frequency.
Intensity of the Vibrato (LFO).
Speed of the Vibrato (LFO).
Delay time before the Vibrato (LFO) begins,
after the sound starts.
Sty
Sty
Advertisement
Table of Contents
