Recording mixer events
You can record pan, volume and equalizer settings as mixer events on the audio
track. The audio track will be played back according to the Pan/Volume, EQ,
and Send 1/2 settings that were recorded.
Use the procedure "Recording an audio track" to record an audio track.
1
Access the Sequencer mode P1 tab 7 page (Preference).
2
In Recording Setup, specify the recording method for mixer events.
3
When recording mixer events, select Overwrite.
Alternatively, you may use Auto Punch-In or Manual Punch-In to specify the
measures of the area in which recording will take place.
Access the tab 6 page (MixA1–4).
4
For the Track selection, select MIXER REC.
5
For the audio track on which you want to record mixer events, set the Mix Audio
6
Track Mode to WRITE.
For audio tracks on which you do not want to record mixer events, set the
Mix Audio Track Mode to READ or MANUAL.
Press the [RESET] key to return to the beginning of the songpress the [REC/WRITE]
7
key and then (after making sure that the [START/STOP] key, LED is blinking) press
the [START/STOP] key.
Recording will start.
While listening to the song, adjust EQ, Send 1/2, and Pan/Volume for the audio
8
track on which you want to record mixer events.
If you execute the page menu command "Volume Pairing," adjusting the vol-
ume of one channel in a stereo pair will simultaneously adjust the volume of the
other channel.
When you are finished, press the [START/STOP] key.
9
5
8
6
Playback
4
13