Korg Triton Le Basic Manual page 8

Sequencer
TRITON Le provides a high-performance 16-track
MIDI sequencer, with more than sufficient power for
use as a stand-alone sequencer. The sequencer can
serve as the core that brings together TRITON Le's
numerous capabilities, allowing it to serve as an inte-
grated music workstation.
For more on TRITON Le's sequencer ( p.61).
RPPR
TRITON Le features a RPPR (Realtime Pattern Play/
Recording) function.
In Sequencer mode, this function allows you to assign
preset patterns or user patterns (with a specified play-
back track) to individual keys on the keyboard, and
playback or record that pattern in realtime simply by
pressing the assigned key. Numerous preset patterns,
including patterns ideal for drum tracks, are built into
the internal memory.
Dual polyphonic arpeggiator
• Five preset arpeggio patterns (UP, DOWN, ALT1
ALT2, RANDOM) and 216 user arpeggio patterns
are provided. With the factory settings, these
contain a wide variety of preset user patterns.
In addition to providing conventional arpeggiator
functionality, the polyphonic arpeggiator of the
TRITON Le can respond to the pitches or timing at
which you play the keyboard, and produce a
diverse range of chords or phrases. This can be used
to play a variety of drum phrases (using the "Fixed
Note Mode" that is ideal for drums), bass phrases,
or guitar and keyboard backing riffs. The arpeggia-
tor is also effective for use with subtly moving pads,
synth sounds, or sound effects.
In Combination mode, and Sequencer mode, the
TRITON Le provides dual arpeggiators that can
simultaneously play two arpeggio patterns. You can
apply separate arpeggio patterns to drum and bass
programs, or use keyboard splits or velocity to
switch between arpeggio patterns for an even more
dynamic performance.
4 channel audio output
• In addition to the L/MONO and R main stereo
audio outputs, TRITON Le provides two
individual audio outputs, for a total of four
channels of audio output. The sound from each
oscillator, drum, timbre/track, or insertion effect
can be routed freely to any output.
2
EXB-SMPL sampling upgrade
The following functionality can be added by installing
the separately sold EXB-SMPL option.
• Sampling mode is added. Input sources from the
two-channel audio inputs can be sampled and
edited to create original multisamples or samples,
which can then be used in a program or drum kit.
For details on the features of Sampling mode, refer
to p.82.
• Two-channel audio input is added. This two-
channel audio input allows 48 kHz 16 bit linear
mono/stereo sampling. A MIC or LINE level select
switch and level adjustment control supports a
wide range of external audio sources, from mic
level to line level.
The audio input can also be routed to the effects.
You can apply an effect while sampling, or use the
TRITON Le as a 2-in/4-out effect processor.
• A SCSI connector is added, allowing external SCSI
devices such as hard disks to be connected. A
connected external SCSI device can be used in the
same way as SmartMedia to save or load data.