Connections; Connecting Audio Equipment Etc; Connecting The Ac/Ac Power Supply; Connecting Audio Output Devices - Korg Triton Le Basic Manual

Connecting audio equipment etc.

Connections must be made with the power turned
off. Please be aware that careless operation may
damage your speaker system or cause malfunc-
tions.
1. Connecting the AC/AC power
supply
Connect the included AC/AC power supply to the
AC power supply inlet of TRITON Le, and then
connect the other end of the cable to an AC outlet.

2. Connecting audio output devices

AUDIO OUTPUT (MAIN) L/MONO, R,
(INDIVIDUAL) 1, 2
Here, you can connect a set of amplified monitor
speakers or your audio system to output TRITON Le's
sound.
If you wish to use the AUDIO OUTPUT (INDIVID-
UAL) 1–2 jacks of TRITON Le, we recommend that
you use a mixer.
If you playback TRITON Le through your stereo
audio system, be aware that high volumes may
damage your speakers. Be careful not to raise the
volume excessively.
Connecting separately sold
12

Connections

Connecting MIDI equipment
Connect the AUDIO OUTPUT (MAIN) L/MONO
and R jacks to the INPUT jacks of your powered
monitor system, mixer etc.
L/MONO and R are the main outputs. If you are
outputting in stereo, make connections to the
(MAIN) L/MONO jack and the R jack. If you are
outputting in monaural, make connections to the
(MAIN) L/MONO jack. We recommend that you
playback in stereo if possible.
If you wish to output from the AUDIO OUTPUT
(INDIVIDUAL) 1, 2, jacks, connect these jacks to
your mixer, and then connect the mixer output to
the INPUT of your powered monitor system etc.
For details on the output of each jack ( p.108–
"Routing").
Headphones
When using headphones, plug them into the head-
phones jack located on the front panel.
Power Switch
INPUT
Connecting pedals etc
Headphones
PHONES
to an AC outlet
AC/AC power supply
Connecting the power cable
Headphones
PHONES
Connecting audio output devices
OUTPUT INPUT
Powered monitors, etc.