Other Problems - Korg kronos Operation Manual

• If using CD-R, please use new media. If using CD-RW,
use the page menu command Erase CD-RW (Disk–
Make Audio CD) to erase the contents of the media
before you execute Save.
A KRONOS CD-R/RW is not recognized by an
external device
A CD-R/RW saved or copied on the KRONOS using packet
writing is not recognized on a computer.
• If you install a UDF version 1.5 compatible UDF reader
or packet writing software on your computer, it will be
possible to recognize the disc.
• In the case of a CD-R, it may be possible to make the
disc be recognized by executing the page menu
command Convert to ISO9660 Format (Disk– Utility
page) to convert the disc to ISO9660 format. However
depending on the state in which the disc was saved, it
may be converted into ISO9660 level 3 format, and may
still not be recognized. In this case if you install
ISO9660 level 3 compatible reader software or packet
writing software on your computer, it will be possible to
recognize the disc.
A CD-R/RW that was saved or copied on the KRONOS
using packet writing is not recognized by the
TRITON/TRITON pro/TRITON proX/ TRITON-
Rack/TRITON Le.
• These models do not support UDF version 1.5, and
therefore will not recognize such a disc.
• In the case of a CD-R, it may be possible to make the
disc be recognized by executing the page menu
command Convert to ISO9660 Format (Disk– Utility
page) to convert the disc to ISO9660 format. However
depending on the state in which the disc was saved, it
may be converted into ISO9660 level 3 format, and may
still not be recognized.
Can't write audio tracks
Additional writing is not possible on a CD-R/RW disc that
has been finalized.
Can't play back the disc on an audio CD player
Did you finalize the disc?
• If you want to finalize the disc after writing additional
data, check the Execute finalize too check box when
executing the page menu command "Write to CD"
(Disk– Make Audio CD), so that the disc will be

Other problems

Date and time are incorrect
Saved files or sampled WAVE files have an incorrect date or
time.
• Use the page menu command Set Date/Time (Disk–
Utility page) to set the current date and time. For more
information, see "Setting the date and time" on page 209.
Does the message "The clock battery voltage is low. Please
replace the battery, and set the date and time in Disk mode"
appear? If so, the calendar backup battery needs to be
replaced. Your Korg Distributor can help you find a service
center to replace the battery.
Troubleshooting Other problems
finalized. For more information, see "Write to CD" on
page 855 of the Parameter Guide.
• If you only want to finalize the disc, select the page
menu command Finalize Audio CD (Disk– Make Audio
CD), and press the OK button to finalize the disc. For
more information, see "Finalize Audio CD" on page 855
of the Parameter Guide.
Are you using CD-R media?
• Since some CD players are unable to play CD-RW
media, we recommend that you use CD-R media.
Have you tried using a different type of media?
• Some CD-R/RW media cannot be played by some CD
players. You may be able to play back successfully by
using a different type (brand) of CD-R/RW media.
WAVE files
Can't load
Is the WAVE file in a format that the KRONOS can load?
• Only 48 kHz or 44.1 kHz WAVE files can be inserted
into an audio track in a Song, or into the Track CD List.
Can't preview
Is the WAVE file in a format that the KRONOS can load?
• Only 48 kHz or 44.1 kHz WAVE files can be previewed
by pressing the Play button in the directory window.
Some Global settings are stored
automatically, and not saved to PCG files
Some settings in Global mode are stored automatically, and
are not saved in the Global section of PCG files. If you wish
to duplicate or restore these settings, you will need to do so
by editing the parameters manually.
This includes:
• The Auto Power-Off parameter (for those models which
support this function)
• Fan Control setting
As well as all settings on the following pages:
• 0–3: KSC Auto-Load
• 0–5: Network
267