1 , 3
Garment body
clamp (left)
B
2
B
(3) Replacing the binder
Fig. 1
Garment body
clamp (right)
A
B
A
A
B
C
• Fine adjustment of single-welt type
1 Move the position of garment body clamp to
inside (direction A) on the panel.
2 It is possible to perform the fine adjustment of
the position with adjustment knob for single-welt
B .
Move it clockwise to inside (direction A) and
counterclockwse to outsde.
3 Move the position of garment body clamp to
outside (direction B) on the panel and confirm
the poston.
1 Turn lever A counterclockwse wth the bnder
lifted as shown in Fig. 1, and remove welting
patch scale for double-welt (single-welt) (asm.).
2 Set welting patch scale for double-welt (single-
welt) (asm.) and fix it with lever A .
When fixing the welting patch scale for
double-welt (single-welt) (asm.), perform
fixing in the state that plane B comes in
contact with plane C .
− 104 −