Sewing Screen (Alternate Sewing Mode) - JUKI APW-895/IP-420 Instruction Manual

(4) Sewing screen (Alternate sewing mode)

A B
E
F
Symbol Name of button
INTERLINING SUPPLYING button
A
TYPE OF WELT CHANGE-OVER button
B
CLAMP UP PROHIBITION AT SEWING END
C
button
DIRECT PATTERN LIST button
D
COUNTER CHANGE-OVER button
E
COUNTER VALUE CHANGE button
F
NEXT SEWING DATA CHANGE-OVER button
G
BOBBIN THREAD (RIGHT) REMAINING
H
AMOUNT VALUE
B O B B I N THREA D (LEFT) RE MA INING
I
AMOU'NT VALUE
MARKING LIGHT SETTING button
J
It is possible to customize display/non-display of the respective buttons.
＊
For the details, refer to
C D
G
H
I
J
When this button is pressed, interlining is supplied.
＊ This is displayed when "With" of
with the optional setting.
Type of welt change-over screen is displayed, and change-over of type of welt and
adjustment of parallelism of the binder can be performed.
When this button is held pressed, the clamp is returned in the lowered state at the time of
sewing end.
It is convenient to use this button at the time of adjustment of marking light and trial sewing.
Direct pattern list screen is displayed and selection of the sewing data can be performed.
When this button is pressed, display of sewing counter and number of pcs. counter is
changed over. This button is displayed only when both sewing counter and number of pcs.
counter are ON.
Counter value which is displayed at present is changed.
Sewing pattern to be sewn next which is enclosed with yellow frame is changed over.
＊ This is not displayed when flap priority sewing selection
This button detects reflecting light from bobbin and informs that bobbin thread remaining
amount is running out. When one stitching completes, the counter value is subtracted, and
the count-up screen is displayed when "0" is reached.
＊ This button is displayed only when the reflecting light from bobbin is detected.
This button detects reflecting light from bobbin and informs that bobbin thread remaining
amount is running out. When one stitching completes, the counter value is subtracted, and
the count-up screen is displayed when "0" is reached.
＊ This button is displayed only when the reflecting light from bobbin is detected.
Marking light setting screen is displayed, and changeover of marking light irradiation position
are performed.
"^-13. CUSTOMIZING THE DATA INPUT SCREEN"
Description
and setting of change of marking light set value
− 31 −
, automatic interlining supplying device is set
is ON.
,
p.75.
and