JUKI APW-895/IP-420 Instruction Manual page 78

＊ It is possible to clear and register the number of pedal steps.
＊ When the function is determined without registering MACHINE START
pled.
＊ Whether or not the clamp foot comes down from right or left is determined by
order change-over. When right and left are set to the same time, even if the independent motion is set in
this screen, the right and the left actuate at the same time.
＊ Whether or not the flap presser comes down from right or left is determined by
ing order change-over.
When right and left are set to the same time, even If the independent motion is set in this screen, the
right and the left actuate at the same time.
Display
Dart stretcher (optonal)
Vacuum sucton
Clamp foot one side down
Clamp foot remaining side down
5 Functions below can be registered from first step in order. Func-
tions that can be registered are in the state of button as
, and dsplayed n order. When the button s pressed, the color
changes and the function is registered. The number of pedal
F steps s advanced wth ▲▼ button
E
pedal steps s returned wth
one.
When functions are registered up to the last, ENTER button
G is displayed. Press it to determine the registered data.
G
Description Display
Bnder down
Flap presser one sde down
Flap presser remanng sde down
Machne start
− 74 −
E . When the number of
F , it becomes the state before
, knee swtch start s ap-
clamp foot lowering
flap presser lower-
Description