Observing The Operation Measurement Information - JUKI APW-895/IP-420 Instruction Manual

(5) Observing the operation measurement information

A
C
Operation measurement screen
(Screen A)
1 Display the operation measurement screen
Press OPERATION MEASUREMENT SCREEN DISPLAY button
A in the information screen. The operation measurement
A
screen (screen A) is displayed.
Information on the following 5 items is displayed in the operation
measurement screen.
A : This item automatically displays the operation rate from the
B
time of starting the measurement.
B : Ths tem automatcally dsplays the mean machne speed
from the time of starting the measurement.
D
C : This item automatically displays the mean pitch time from the
time of starting the measurement.
E
D : This item automatically displays the mean machine time from
the time of starting the measurement.
E : This item displays the number of times of thread trimming per
process.
Input the number of times referring to item 2 below.
2 Input the number of times of thread trimming
Next, input the number of times of thread trimming per process.
Press NUMBER OF TIMES OF THREAD TRIMMING button
E and the number of times of thread trimming input
screen s dsplayed.
Input the value you desire with ten keys or UP/DOWN buttons.
After the input, press ENTER button
B
＊ When the input value is "0", count of the number of times of
thread trimming is not performed. Use this function by con-
nectng the external swtch.
− 86 −
B .