Using The Information - JUKI APW-895/IP-420 Instruction Manual

15. uSING tHE INForMAtIoN

There are three functions below, in the information function.
A
B
A
Information screen
(screen A)
1 Display the information screen
Press INFORMATION key
the input screen and the information screen (screen A) is dis-
played.
A Maintenance inspection information
Oil replacement (grease-up) time, needle replacement time,
cleaning time, etc. are specified, and when the specified
time has passed, the warning notice can be performed.
"^-15-(1) Observing the maintenance inspection
See
C
information"
B Production control information
By means of function to display target production and
actual production, the target achieving consciousness of a
lne or a group s enhanced and also the progress can be
confirmed in one glance.
"^-15-(3) Observing the production control infor-
See
mation" p.82
production control information"
C Operation measurement information
Information on machine operating situation, machine op-
eratng rate, ptch tme, machne tme, and machne speed
can be dsplayed.
"^-15-(5) Observing the operation measurement
See
information"
− 79 −
A of the switch seat section in
p.80.
"^-15-(4) Performing setting of the
and
p.84.
p.86.