JUKI APW-895/IP-420 Instruction Manual page 121

Error code
E496
E497
E498
E499
E702
E703
E704
E730
E731
E733
E802
Description of error
condensation at sewing end length over
When condensation pitch X number of stitches exceeds 15.0 mm
Back tack at sewing end length over
When back tack pitch X number of stitches exceeds 6.0 mm
condensation at sewing start length over
When condensation pitch X number of stitches exceeds 15.0 mm
Back tack at sewing end length over
When back tack pitch X number of stitches exceeds 6.0 mm
CPU runaway detection
When program abnormality has occurred in CPU
Panel is connected to the sewing machine which is not
supposed (Machine type error)
When the machne type between panel and sewng machne s
different in the initial communication
Inconsistency of system version
When system software version is inconsistent in the initial
communcaton
Main shaft motor is defective or lacking for phases.
When encoder of sewing machine motor is abnormal
Main motor hole sensor is defective or position sensor is
defective.
When hole sensor of sewing machine motor or position sensor is
defective
reverse rotation of main shaft motor
When the sewng machne motor rotates n the reverse drecton
Power momentary cut detection
When nput power s momentarly cut
− 117 −
How to recover
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Turn OFF the
power.
Possible to
re-start after
reset.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.