Table of Contents
Advertisement
Maintenance
Disconnect the machine from
the mains before carrying out
any maintenance.
Cleaning
If lint and bits of thread
accumulate in the hook, this will
interfere with the smooth
operation of the machine.
Check regularly and clean the
stitching mechanism when
necessary.
Bobbin holder
1. Remove the bobbin cover
2. Clean the bobbin holder with
Hook race and feed dog
3. Remove the needle, presser
4. Lift up bobbin holder and re-
5. Clean the hook race, feed
6. Replace the bobbin holder
b
a
Replacing the LED Lamp
This appliance is equipped with
a durable LED illumination,
which is expected to last for the
whole lifetime of the equipment.
Please contact a local service
agent, should the lamp
nevertheless require to be
replaced.
72
plate and bobbin.
a brush.
foot and holder.
Remove the bobbin cover
plate and bobbin.
Remove the screw holding
the needle plate and remove
the needle plate.
move it.
dog and bobbin holder with a
brush. Also clean them, us-
ing a soft, dry cloth.
into the hook race so that the
tip (a) fits to the stopper (b)
as shown.
Advertisement
Table of Contents
