CustomZNg The Pedal OperatOn Data - JUKI APW-895/IP-420 Instruction Manual

(2) Customizing the pedal operation data
A B
C
Pedal motion function setting screen
(Screen A)
1 Press button
cede or not wth the pedal depressed to the reverse step.
Display
To make clamp foot recede
Not to make clamp foot recede
2 Press button
D
er actuate wth the pedal depressed to the reverse step.
Display
To actuate
Not to actuate
3 Press button
tive pedal operations of first to seventh steps.
In case of "lock", even when the pedal is released, the motion
state by pedal operaton s held unless the pedal s depressed to
the reverse step or reset of pedal is performed.
Display
To lock
Not to lock
4 Press button
screen (screen A) is displayed. Then the motion function to be
registered to the number of the respective pedal steps can be set.
− 73 −
A , and set whether to make the clamp foot re-
Description
B , and set whether or not the nterlnng press-
Description
C and set whether or not to lock the respec-
Description
D , and the pedal motion function setting