Figure 28. Installing Processor - Open The Load Plate; Figure 29. Installing Processor - Install The Processor; Figure 30. Installing Processor - Remove The Cover - Intel S2600CP Service Manual

3. Install the Processor. Take the processor out of the box and remove the protective shipping
cover (see letter "A"). Orient the processor with the socket so that the processor cutouts match
the four orientation posts on the socket (see letter "B"). Note location of gold key at corner of
processor (see letter "C").
/
NOTE
The underside of the processor has components that may damage the socket pins if
installed improperly. Processor must align correctly with the socket opening before
installation. DO NOT DROP processor into socket!
4. Remove the Cover. Press the cover to remove it. Save the protective cover.
5. Close the Load Plate. Carefully lower the load plate over the processor.
®
Intel Server Board S2600CP Intel
Figure 28. Installing Processor – Open the Load Plate
Figure 29. Installing Processor – Install the Processor
Figure 30. Installing Processor – Remove the Cover
®
Server System P4000CP Family Service Guide (Preliminary)
Hardware Installations and Upgrades
25