Intel S2600CP Service Manual page 150

Hardware Installations and Upgrades
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN
5. IPv6
Option Values:
Help Text:
Option to Enable/Disable IPv6 addressing and any IPv6 network traffic on these
channels.
Comments:
changed in order to switch between IPv4 and IPv6 addressing technologies.
When this option is set to Disabled, all other IPv6 fields will not be visible for the Baseboard
LAN and Intel
the Baseboard LAN and Intel
grayed out and inactive.
Back to [BMC LAN
6. IPv6 Source
Option Values:
Help Text:
Select BMC IPv6 source: If [Static], IPv6 parameters may be edited. If [Dynamic], these
fields are display-only and IPv6 address is acquired automatically (DHCP). If [Auto],
these fields are display-only and IPv6 address is acquired using ICMPv6 router /
neighbor discovery.
Comments:
configuration. There is a separate IPv6 Source field for the Intel
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is Enabled, the initial value for this field is acquired from the BMC, and
its setting determines whether the other Baseboard LAN IPv6 addressing fields are display-only
(when Dynamic or Auto) or can be edited (when Static).
Back to [BMC LAN
136
Configuration]
Enabled
Disabled
The initial value for this field is acquired from the BMC. It may be
®
RMM4 DMN (if installed). When IPv6 addressing is Enabled, all IPv6 fields for
®
RMM4 DMN will become visible, and all IPv4 fields will be
Configuration]
Static
Dynamic
Auto
This specifies the IP Source for IPv6 addressing for the Baseboard LAN
Configuration]
®
Intel Server Board S2600CP Intel
®
RMM4 LAN configuration.
®
Server System P4000CP Family Service Guide