Intel S2600CP Service Manual page 142

Hardware Installations and Upgrades
7. TPM State
Option Values:
Help Text:
Comments:
A Disabled TPM device does not execute commands that use the TPM functions and
TPM security operations are not available.
An Enabled & Deactivated TPM is in the same state as a disabled TPM, except that
setting of the TPM ownership is allowed if it is not present already.
An Enabled & Activated TPM executes all commands that use the TPM functions and
TPM security operations are also available.
/
Back to [Security
8. TPM Administrative Control
Option Values:
Help Text:
[No Operation] - No changes to current state.
[Turn On] - Enables and activates TPM.
[Turn Off] - Disables and deactivates TPM.
[Clear Ownership] - Removes the TPM ownership authentication and returns the TPM to
factory default state.
Note: BIOS setting will return to [No Operation] on every boot cycle by default.
Comments:
perform a Hard Reset in order to become effective.
/
Back to [Security
128
<Displays current TPM Device State>
May be:
Enabled & Activated
Enabled & Deactivated
Disabled & Activated
Disabled & Deactivated
<None>
Information only. Shows the current TPM device state.
NOTE
This option appears only on boards equipped with a TPM.
Screen]
No Operation
Turn On
Turn Off
Clear Ownership
Any Administrative Control operation selected will require the system to
NOTE
This option appears only on boards equipped with a TPM.
Screen]
®
Intel Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide