Intel S2600CP Service Manual page 153

When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN
13. Subnet Mask
Option Values:
Help Text:
View/Edit Subnet Mask. Press <Enter> to edit.
Comments:
DMN LAN. There is a separate IPv4 Subnet Mask field for the Baseboard LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN
14. Gateway IP
Option Values:
Help Text:
View/Edit Gateway IP. Press <Enter> to edit.
Comments:
DMN LAN. There is a separate IPv4 Gateway IP field for the Baseboard LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN
15. IPv6 Source
Option Values:
Help Text:
Select Intel
[Dynamic], these fields are display-only and IPv6 address is acquired automatically
(DHCP). If [Auto], these fields are display-only and IPv6 address is acquired using
ICMPv6 router / neighbor discovery.
®
Intel Server Board S2600CP Intel
Configuration]
[Entry Field 0.0.0.0, 0.0.0.0 is default]
This specifies the IPv4 addressing Subnet Mask for the Intel
Configuration]
[Entry Field 0.0.0.0, 0.0.0.0 is default]
This specifies the IPv4 addressing Gateway IP for the Intel
Configuration]
Static
Dynamic
Auto
®
RMM4 IPv6 source: If [Static], IPv6 parameters may be edited. If
®
Server System P4000CP Family Service Guide (Preliminary)
Hardware Installations and Upgrades
®
RMM4
®
RMM4
139