Replacing A Hot-Swap Fan; Removing The Hot-Swap Fan; Installing The Hot-Swap Fan; Figure 85. Removing Hot-Swap Fan - Intel S2600CP Service Manual

Hardware Installations and Upgrades

Replacing a Hot-swap Fan

/
NOTE
This procedure applies only to the Intel
configuration.

Removing the Hot-swap Fan

1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
4. Press latch on fan and pull on handle to remove hot-swap fan from chassis.

Installing the Hot-swap Fan

1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
4. Insert hot-swap fan into corresponding chassis slot until it clicks into place.
52

Figure 85. Removing Hot-swap Fan

®
Intel Server Board S2600CP Intel
®
Server Chassis P4000M family with hot-swap fan
®
Server System P4000CP Family Service Guide