Intel S2600CP Service Manual page 155

Comments:
There is a separate IPv6 Prefix Length field for the Baseboard LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IPv6 Source determines whether this field is display-only (when Dynamic or Auto) or
can be edited (when Static).
Back to [BMC LAN
19. BMC DHCP Host Name
Option Values:
Help Text:
View/Edit BMC DHCP host name. Press <Enter> to edit. Host name should start with an
alphabetic, remaining can be alphanumeric characters. Host name length may be from 2
to 63 characters.
Comments:
Source or IPv6 Source options is set to Dynamic. This is the name of the DHCP Host from
which dynamically assigned IPv4 or IPv6 addressing parameters are acquired.
The initial value for this field is supplied from the BMC, if there is a DHCP Host available. The
user can edit the existing Ho or enter a different DHCP Host Name.
If none of the IP/IPv6 Source fields is set to Dynamic, then this BMC DHCP Host Name field
will be grayed out and inactive.
Back to [BMC LAN
20. User ID
Option Values:
Help Text:
Select the User ID to configure: User1 (anonymous), User2 (root), and User3/4/5 are
supported.
Comments:
supports 15 User IDs natively, but only the first 5 are supported through this interface.
Back to [BMC LAN
®
Intel Server Board S2600CP Intel
This specifies the IPv6 Prefix Length for the Intel
Configuration]
[Entry Field, 2-63 characters]
This field is active and may be edited whenever at least one of the IP
Configuration]
anonymous
root
User3
User4
User5
These 5 User IDs are fixed choices and cannot be changed. The BMC
Configuration]
®
Server System P4000CP Family Service Guide (Preliminary)
Hardware Installations and Upgrades
®
RMM4 DMN LAN.
141