Setting Up; Installation Environment; Projection Style - InFocus IN5542 User Manual

Setting up

Setting up
Read this chapter through first before installing the projector.

Installation environment

This product must be installed in a stable, cool and airy location. Check your
installation environment in accordance with the following.
WARNING
as an uneven, tilted, or vibrating location.
►Do not place the product near water - for example, near a bathtub, washbowl,
kitchen sink, or laundry tub; in a wet basement, near a swimming pool, beach; or
outdoors.
CAUTION
►Do not place the product in a dusty, smoky, or humid place -
for example, in a passageway, in a smoking space, in a kitchen, or outdoors.
►Do not place the product near heat sources - for example, radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
►Do not place this product in a magnetic field.
NOTICE
►Do not place the product in a place where radio interference may
be caused.
► Do not place the projector in a place where any strong light can hit the remote
sensors.

Projection style

This projector can be used in the following projection styles. Choose the style
suitable to your use.
NOTE
• When mounting the projector in a ceiling mount or upward/downward
projection style, specific mounting accessories (77) and service are required
to install the projector. Contact your dealer for more information. If a different
projection style is needed, contact your dealer.
WARNING
►Only use manufacturer approved mounting accessories, and use authorized
service personnel to install your projector and mounting accessories
8
►Do not place the product on an unstable surface surface such
(2) Ceiling mount
(suspended from a ceiling)
►Consult your dealer about installation beforehand.
(1) Standard style
(placed on a table)