InFocus IN5542 User Manual page 55

Item
COMMUNICATION
INFORMATION
SERVICE
Selecting this item displays a dialog titled "INPUT-INFORMATION-".
(continued)
It shows the information about the current input.
• The "FRAME LOCK" message on the dialog means the frame lock
function is working.
• The "SCART RGB" message means the Component port
is working as a SCART RGB input port. Please refer to the
COMPONENT item in INPUT menu (37).
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT
is displayed together with the input information in the INPUT-
INFORMATION- box (66).
FACTORY RESET
Selecting OK using ► the button performs this function. By this
function, all the items in all of menus will collectively return to the
initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE, SECURITY and NETWORK settings are not reset.
COMMUNICATION GROUP / COMMUNICATION ID
This menu is available only when DAISY CHAIN is
selected for the COMMUNICATION TYPE.
In simultaneous control of multiple projectors by
a daisy chain, you can give the projectors the
communication group identification and the ID number
to identify projectors connected in the same bus.
COMMUNICATION GROUP:
A ó B ó C ... O ó P
(continued)
COMMUNICATION ID:
1 ó 2 ó 3 ... 63 ó 64
NOTE
COMMUNICATION GROUP, and 1 is selected for
the COMMUNICATION ID as the default settings.
CANCEL ð OK
Description
• The A is selected for the
OPTION menu
55