InFocus IN5542 User Manual page 57

Item
SETUP
(continued)
(continued on next page)
Use the ▲/▼/◄/►
buttons to enter the IP
ADDRESS.
This function can only be used when DHCP is set to
IP
OFF.
ADDRESS
• The IP ADDRESS is the number that identifies this
projector on the network. You cannot have two devices
with the same IP ADDRESS on the same network.
• The IP ADDRESS "0.0.0.0" is prohibited.
Use the ▲/▼/◄/►
buttons to enter the same
SUBNET MASK used by
SUBNET
your PC.
MASK
This function can only be used when DHCP is set to
OFF.
• The SUBNET MASK "0.0.0.0" is prohibited.
Use the ▲/▼/◄/►
buttons to enter the
DEFAULT GATEWAY
DEFAULT
(a node on a computer network that serves as an
GATEWAY
access point to another network) address.
This function can only be used when DHCP is set to
OFF.
Use the ▲/▼/◄/►
buttons to input the DNS
DNS
server address.
SERVER
The DNS server is a system to control domain names
and IP addresses on the Network.
Use the ▲/▼ buttons to enter
the TIME DIFFERENCE.
Set the same TIME
DIFFERENCE as the one
TIME
set on your PC. If unsure,
DIFFERENCE
consult your IT manager.
Use the ► button to return
to the menu after setting the
TIME DIFFERENCE.
Use the ▲/▼/◄/►
buttons to enter the
Year (last two digits),
DATE
Month, Date, Hour and Minute.
AND
• The projector will override this setting and retrieve
TIME
DATE AND TIME information from the Time server
when SNTP is enabled. ( Date/Time Settings of the
User's Manual - Network Guide)
Description
NETWORK menu
57