Placement; Supplementary Anti-Theft Means - InFocus IN5542 User Manual

Setting up

Placement

When installing the projector according to the previous section "Projection
distance" (9) heed the following information
WARNING
►Do not block or cover the openings on the projector, and keep sufficient space
for ventilation around the projector.
• Do not use the projector on a cushioned surface such a rug, a carpet or
bedding.
• Keep the projector away from light-weight materials such as a piece of paper
that can stick to the intake holes.
►Do not use the projector on an unstable surface surface such as a cart.
►Place the projector so that nothing enters inside of the projector.
• Keep the projector away from small items such as paperclips that can fall into
the inside.
• Keep the projector away from any liquids that can spill or leak into the product.
CAUTION
►Keep the projector away from anything that is heat conductive
such as metal.
• Do not use the projector on a metallic table.
►Keep the projector away from anything that is susceptible to heat such as
some types of plastics.
NOTICE
►Place the projector so that there is nothing that blocks the
projection light to the screen.
► Avoid exposing the remote sensor directly to strong light.

Supplementary anti-theft means

This projector has a security bar for a commercial anti-
theft chain or wire up to 10 mm in diameter, and also
the security slot for the Kensington lock.
For details, see your security tool manual.
NOTE
• These will not prevent theft, but will help prevent
against theft.
WARNING
prevent the projector from falling down, since it is not
designed for this purpose.
CAUTION
or wire near the projector's exhaust vents, since the
chain or wire heated by the hot exhaust may cause
burns.
10
►Keep the projector away from anything that is easy to catch
fire.
►Do not use the security slot to
►Do not place the anti-theft chain
Security bar
Anti-theft chain or wire
Security slot