Pbyp (Picture By Picture) - InFocus IN5542 User Manual

PbyP (Picture by Picture)

The PbyP is a function to display two different picture signals on a screen that is
split in two areas for each signal. Some of functions can be used with the same
operation as it for the normal mode (not in the PbyP mode). There are some
operations available only in the PbyP mode.
Starting the PbyP
Press the PbyP button on the
remote control to start the PbyP
function. To quit the PbyP mode,
press the button again.
Showing the setting information
The setting information is displayed for several
seconds when the PbyP function is started. It shows
the input signal information for each area. There also
will be a yellow frame on the area where most of operations are effective. The
information can be displayed using the cursor buttons ▲/▼/◄/► when the setting
information is not on the screen.
Changing the main area
Most of operations are effective for the main area
only. Also the audio input signal paired with the
picture input signal for the main area is assigned
as the audio output signal. The main area can be
changed using the cursor buttons ◄/► when the
setting information is on the screen.
Changing the picture input signal
Press the COMPUTER, VIDEO or DIGITAL button
while in the PbyP mode, the menu to select the
input signal will be appeared. Choose a signal using
the cursor buttons ▲/▼. If you want to change the signal in the
sub area, switch the main area using the cursor buttons ◄/►
first. Displaying the same signal on the areas is not allowed.
For other combinations of the input signal, refer to the right
table. Any combinations marked with X can not be selected.
Using the PbyP SWAP function
Press the MY BUTTON assigned the PbyP SWAP
(49). The position of the area is exchanged without
any setting change.
NOTE
•For some signals, it may not be displayed correctly in the PbyP mode,
even if it can be displayed properly in the normal mode.
LASER
INDICATOR
STANDBY/ON MY SOURCE COMPUTER
VIDEO
ID 1 ID 3
DIGITAL
ID 2 ID 4
BLANK LASER
ENTER
FREEZE MENU
SHUTTER RESET
ASPECT
PbyP AUTO POSITION
MY BUTTON
MAGNIFY
1 3
ON
2 4
OFF
KEYSTONE
FOCUS ZOOM
+ +
LENS SHIFT
- -
normal mode
setting information
main area
sub area
<signal combination>
Sub
Main
COMPUTER IN1 0
COMPUTER IN2 0
BNC 0 0
HDMI 0 0
DVI-D 0 0
Component 0 0
Scart RGB 0 0
S-Video 0 0
Video 1 0 0
Video 2 0 0
Operating
PbyP mode
main area
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
0 X 0 X X X X
0 X 0 X X X X
0 0 0 0 0 0
0 X X X X X
0 X X 0 X X X
0 X X 0 X X X
0 X X 0 X X X
27