Operating; Turning On - InFocus IN5542 User Manual

Operating

Turning on

The following walks you through the steps to turn the projector on. For other
devices, follow the manual of each.
1.
Make sure that the power cord is firmly and
correctly connected to the projector and the outlet.
2.
Press down the side marked "I" on the power
switch.
The POWER indicator will light solid orange.
Then wait for the buttons to become ready. It may
take several seconds.
3.
Press the STANDBY/ON button (on the projector
or the remote control).
The projection lamp will light up and the POWER
indicator will begin blinking green. When the power
is completely on, the indicator will stop blinking
and light solid green.
To display the picture, select an input signal according to the section "Displaying
and switching the image" (22).
NOTE
• When the item DIRECT ON of the OPTION menu is set to ON and
the projector is turned off using a power switch instead of the STANDBY/ON
button, switching the power switch on turns the projector on immediately (unlike
the procedure described above).
WARNING
projector while the lamp is on.
►Do not approach the lamp cover and the exhaust vents, while the projection
lamp is on.
NOTICE
►Do not turn your device on prior to the projector, except when
directed by the device manuals.
►Do not look directly into the lens or the openings on the
Operating
Power
POWER indicator
switch
STANDBY/ON
STANDBY/ON
button
19