Directed Call Pick-Up - Polycom SIP 2.2.0 Administrator's Manual

Sip 2.2.0
Hide thumbs Also See for SIP 2.2.0:
Table of Contents

Advertisement

Note
Central
Configuration file:
sip.cfg
(boot server)
Configuration file:
phone1.cfg
Local
Web Server
(if enabled)
Local Phone User
Interface

Directed Call Pick-Up

Central
Configuration file:
sip.cfg
(boot server)
Server-based call forwarding is disabled if Shared Call Appearance or Bridged Line
Appearance is enabled.
Configuration changes can performed centrally at the boot server or locally:
Enable or disable server-based call forwarding.
For more information, refer to
Enable or disable server-based call forwarding as a per-registration
feature.
For more information, refer to
Set all call diversion settings including a global forward-to contact and
individual settings for call forward all, call forward busy, call forward
no-answer, and call forward do-not-disturb.
For more information, refer to
Set all call diversion settings.
Navigate to: http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the <Ethernet address>-phone.cfg is
removed from the boot server.
The user can set the call-forward-all setting from the idle display
(enable/disable and specify the forward-to contact) as well as divert
callers while the call is alerting.
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the <Ethernet address>-phone.cfg is
removed from the boot server.
Calls to another phone can be picked up by dialing the extension of the other
phone. This feature depends on support from a SIP server.
Configuration changes can performed centrally at the boot server:
Turn this feature on or off.
For more information, refer to
Configuring Your System
SIP <SIP/>
on page
A-10
Registration
<reg/>on page
Diversion <divert/>
on page A-90.
Feature <feature/>
on page A-77.
A-84
4 - 19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIP 2.2.0 and is the answer not in the manual?

Questions and answers

Table of Contents