Polycom SIP 2.2.0 Administrator's Manual page 203

Attribute
divert.busy.x.enabled
divert.busy.x.timeout
divert.busy.x.contact
Attribute
divert.noanswer.x.enabled
divert.noanswer.x.timeout
divert.noanswer.x.contact
Busy <busy/>
Calls can be automatically diverted when the phone is busy.
Permitted Values
0, 1
positive integer
ASCII encoded string
containing digits (the user part
of a SIP URL) or a string that
constitutes a valid SIP URL
(6416 or 6416@polycom.com
No Answer <noanswer/>
The phone can automatically divert calls after a period of ringing.
Permitted Values
0, 1
positive integer
ASCII encoded string
containing digits (the user part
of a SIP URL) or a string that
constitutes a valid SIP URL
(6416 or 6416@polycom.com)
Default Interpretation
1 If set to 1, calls will be
forwarded on busy to the
contact specified below.
Note: If server-based call
forwarding is enabled, this
parameter is disabled.
60 Time in seconds to allow
altering before initiating the
diversion.
Null Forward-to contact for calls
forwarded due to busy status, if
Null, divert.x.contact will be
used.
Default Interpretation
1 If set to 1, calls will be
forwarded on no answer to the
contact specified.
Note: If server-based call
forwarding is enabled, this
parameter is disabled.
60 Time in seconds to allow
altering before initiating the
diversion.
Null Forward-to contact used for
calls forwarded due to no
answer, if Null,
divert.x.contact will be
used.
Configuration Files
A - 91