Polycom SIP 2.2.0 Administrator's Manual page 127

Sip 2.2.0
Hide thumbs Also See for SIP 2.2.0:
Table of Contents

Advertisement

Attribute
voIpProt.SIP.requestValidation.x.req
uest.y.event
voIpProt.SIP.requestValidation.dige
st.realm
Attribute
voIpProt.SIP.specialEvent.lineSeize.n
onStandard
voIpProt.SIP.specialEvent.checkSync
.alwaysReboot
Attribute
voIpProt.SIP.conference.address
Permitted
Values
A valid string
A valid string
Special Events <specialEvent/>
This configuration attribute is defined as follows:
Permitted
Values
0, 1
0, 1
Conference Setup <conference/>
This configuration attribute is defined as follows:
Permitted
Values
ASCII string
up to 128
characters
long
Default
Interpretation
Null
Determines which events specified with the
Event header should be validated; only
applicable when
voIpProt.SIP.requestValidation.x.re
quest is set to "SUBSCRIBE" or "NOTIFY".
If set to Null, all events will be validated.
Polycom
Determines string used for Realm.
SPIP
Default
Interpretation
1
If set to 1, process a 200 OK response for a
line-seize event SUBSCRIBE as though a
line-seize NOTIFY with Subscription State:
active header had been received, this speeds
up processing.
0
If set to 1, always reboot when a NOTIFY
message is received from the server with
event equal to check-sync.
If set to 0, only reboot if any of the files listed
in [mac].cfg have changed on the FTP
server when a NOTIFY message is received
from the server with event equal to
check-sync.
Default
Interpretation
Null
If Null, conferences are set up on the phone
locally.
If set to some value, conferences are set up
by the server using the conferencing agent
specified by this address. The acceptable
values depend on the conferencing server
implementation policy.
Configuration Files
A - 15

Advertisement

Table of Contents
loading

Table of Contents