Polycom SIP 2.2.0 Administrator's Manual page 213

Name
device.prov.serverName
device.prov.serverType
device.prov.user
device.prov.password
device.prov.appProvType
device.prov.appProvString
device.prov.redunAttemptLi
mit
device.prov.redunInterAtte
mptDelay
device.sntp.serverName
device.sntp.gmtOffset
device.dns.serverAddress
device.dns.altSrvAddress
device.dns.domain
device.auth.localAdminPas
sword
device.auth.localUserPass
word
device.auth.regUserx
device.auth.regPasswordx
device.sec.configEncryptio
n.key
device.syslog.serverName
device.syslog.transport
Possible Values
any string
0 to 4
any string
any string
0 or 1
any string
10, Null
300, Null
any string
-43200 to 46800
dotted-decimal IP address
dotted-decimal IP address
any string
any string
any string
any string
any string
any string
dotted-decimal IP address
OR
domain name string
None=0,
UDP=1,
TCP=2,
TLS=3
Description
For descriptions, refer to
Can be dotted-decimal IP address or domain name
string. SNTP server from which the phone will obtain
the current time
GMT offset in seconds, corresponding to -12 to +13
hours.
Primary server to which the phone directs Domain
Name System queries.
Secondary server to which the phone directs Domain
Name System queries.
The phone's DNS domain.
The phone's local administrator password.
The phone user's local password.
The SIP registration user name for registration x
where x = 1 to 12.
The SIP registration password for registration x
where x = 1 to 12.
Configuration encryption key that is used for
encryption of configuration files.
The syslog server IP address or host name.
The default value is NULL.
The protocol that the phone will use to write to the
syslog server.
If set to "None", transmission is turned off, but the
server address is preserved.
Configuration Files
Server Menu on page 3-9.
A - 101