Polycom SIP 2.2.0 Administrator's Manual page 145

ring
visual
answer
ring-answer
Note
Attribute
se.rt.enabled
se.rt.modification.enabled
se.rt.x.name
se.rt.x.type
se.rt.x.ringer
se.rt.x.callWait
se.rt.x.timeout
se.rt.x.mod
Ring type <rt/>
Ring type is used to define a simple class of ring to be applied based on some
credentials that are usually carried within the network protocol. The ring class
includes attributes such as call-waiting and ringer index, if appropriate. The
ring class can use one of four types of ring that are defined as follows:
Play a specified ring pattern or call waiting indication.
Provide only a visual indication (no audio indication) of incoming call (no
ringer needs to be specified).
Provide auto-answer on incoming call.
Provide auto answer on incoming call after a ring period.
The auto-answer on incoming call is currently only applied if there is no other call in
progress on the phone at the time.
In the following table, x is the ring class number. The x index needs to be
sequential.
Permitted Values
0,1
0,1
UTF-8 encoded string
ring OR visual OR answer
OR ring-answer
integer - only relevant if the
type is set to 'ring' or
'ring-answer'
integer - only relevant if the
type is set to 'ring' or
'ring-answer'
positive integer - only
relevant if the type is set to
'ring-answer'. Default
value is 2000.
0,1
Interpretation
Set to 1 to enable the ring type feature within the
phone, 0 otherwise.
Set to 1 to allow user modification through local
user interface of the pre-defined ring type enabled
for modification.
Used for identification purposes in the user
interface.
As defined in table above.
The ringer index to be used for this class of ring.
The ringer index should match one of
Patterns on page A-31.
The call waiting index to be used for this class of
ring. The call waiting index should match one
defined in Call Progress Patterns
The duration of the ring in milliseconds before the
call is auto answered. If this field is omitted or is left
blank, a value of 2000 is used.
Set to 1 if the user interface should allow for
modification by the user of the ringer index used for
this ring class.
Configuration Files
Ringer
on page A-30.
A - 33