Peripheral Failure - PictureTel CONCORDE4500 4500 User Manual

Peripheral Failure

These are the steps to take if you have problems with your peripheral equipment.
If you have these
symptoms...
No video and/or no
camera motion from your
auxiliary camera
No video from the
document camera or from
the slide Þlm-to-video
camera
No audio or video from
the VCR
88
1. Press
PREVIEW
2. Make sure that the cable connections at the
back of the camera are correct and secure.
3. Make sure that the cable connections from the
camera to the back of the video board are
correct and secure.
4. If there is a
POWER LED
camera, make sure it is lit.
1. Make sure that the cable connections at the
back of the camera are correct and secure.
2. Make sure that the cable connections from the
camera to the back of the video board are
correct and secure.
1. Make sure that the VCR tape has both audio and
video on it.
2. Disconnect the VCR cables from the electronics
module, and plug them directly into the
monitor.
Do this...
for the video source.
AUX A or B
on the back of the