System Warning Messages
This section lists the system warning messages you might see, with a probable
cause and appropriate actions. These messages appear on the screen preceded by
Warning.
If you see...
Data rate too high
or
Data rate too low
Loss of far-end video
No channel connection
Network not ready
No video input
82
It means...
There is a network
problem.
No video is received
from the far-end site.
Connection to the
network interface
equipment has been
lost.
The network is
signaling that it is
temporarily
unavailable.
Video input is not being
received from the far-
end site.
Do this...
1. Make sure all cable
connections are
correct and secure.
2. Call the network
provider.
1. Make sure the far-end
site is sending a valid
video source.
2. Make sure all cable
connections at the far-
end site are correct
and secure.
Make sure all cable
connections are
correct and secure.
Make sure all cable
connections are
correct and secure.
1. Change the video
source.
2. Make sure all cable
connections are
correct and secure.