Using Camera Presets - PictureTel CONCORDE4500 4500 User Manual

To set a camera preset with the QuickPad:
1. Press
NEAR END
The image you are sending appears in the main window of the monitor.
With the QuickPad, you can set presets for your site only.
2. Adjust the camera by pressing
manual controls, if it has them).
Keep doing this until the image appears exactly the way you want it.
3. Press .
SET
4. Press a preset number button or
You can also press the blue button or
preset position for that button.
5. Press
FAR END

Using Camera Presets

Once youÕve set your camera presets, you can simply press the appropriate
button and the camera moves to the preset position.
If you have a LAMB, you can move the camera to a preset position by pressing the
blue button or
SHOW ROOM
To move a camera to a preset position:
Press a preset number button or
The camera moves to the preset view.
50
in the section of the QuickPad.
VIEW
POINT
SHOW ROOM
in the section of the QuickPad to return to normal viewing.
VIEW
on the LAMB.
and (or by using the camera's
ZOOM
to store that camera position.
on the LAMB to store a
SHOW ROOM
.
SHOW ROOM