PictureTel CONCORDE4500 4500 User Manual page 60

2. Insert a blank videotape into the VCR.
You can now begin the videoconference.
3. Press
RECORD
start recording the videoconference.
Playing a Videotape
To play a videotape during a videoconference:
1. Power on the VCR.
2. Insert the videotape into the VCR.
3. When you are ready to play the tape, press
remote control.
You should start the tape before you send video from the VCR to the far end.
4. If you are using the wireless keypad, you can preview the video you are sending
from your VCR by pressing
When you do this, video from your VCR appears on your main monitor. You
see and hear the videotape, but the people at the far-end site do not.
5. Press
SEND VCR
VCR to the far end.
You and the people at the far-end site can now see and hear the videotape, as
well as converse over it.
You can use the buttons on the VCR or the VCRÕs remote control to fast-forward,
rewind, or stop the videotape at any time.
If you press
F.Y.I.
F Y I
VCR, only the audio from your microphone is muted. The
people at the far-end site can still hear audio from the VCR.
54
on the VCR or on the VCR's remote control when you want to
PREVIEW VCR
on the wireless keypad or QuickPad to send video from your
while you are sending video and audio from a
MUTE
on the VCR or on the VCR's
PLAY
.