Section 3: Finishing; Installing Non-Combustible Materials; Installing Combustible Materials - Montigo H36PVN Installation & Maintenance Manual

Step 1. As shown in Figure 3; Use Non combustible Cement board,
supplied by Montigo, screw to Non-combustible Header and 2 x 4's
Figure 3. Non-combustible Cement Board the Fireplace, (supplied by Montigo).
Step 2. As shown in figure 3a; Cut standard Drywall / Wall board
to complete the installation of fireplace surround .
Figure 3a.
XG0649 - 031511
Installation
at sides of unit (see figure 2a on page 6) using sheet metal screws .
Non-combustible Cement Board
(supplied by montigo).
Combustible Drywall / Wall
Board or equivelant.
H36PVN Power Vent Indoor Gas Fireplace
Section 3: Finishing
Fasten above the glass of the
unit to Non-combustible header
and 2 x 4's at side of unit.
Fasten above the glass of the
unit to Non-combustible header
and 2 x 4's at side of unit.
Page 7