Table of Contents
Advertisement
Installation checklist
Carry out the following steps to install the system:
FIRST, read the safety and precaution information on page 7 carefully.
SECOND, mount the Main Equipment as detailed in the section on page 9
THIRD, install the Network and Expansion modules as required
At least one PSTN Line Module must be installed to access the PSTN network.
At least one ISDN Basic Rate Module must be installed to access the ISDN network.
An Expansion module must be installed if the following is required:
More than one ISDN S-bus
A Broadband Module must be installed if an internal LAN or connection to a DSL Line or
Cable Modem is required. It must also be fitted if IP extensions are to be provided.
A Voice Module must be installed to provide Voice Mail, Customized Courtesy Service,
Directory Service or Auto-Attendant functionality.
The Battery Back Up Module and battery must be installed if battery back up is required.
FOURTH, cable the Extensions to the Main Equipment and install the system Feature
phones and standard telephones as detailed in the Cabling Section Page 33. This section
also covers installation the following:
Door Intercom
Doorstrike
External Music-on-Hold
Public Address
V24 Interface to provide Call Logging.
FIFTH, cable the PSTN and ISDN Line connections as detailed in the cabling section Page
33.
SIXTH, Power up the system and provide customer training as detailed on pages 48 and 49.
Mitel 3000 Australia Installation and Maintenance Manual
More than 8 Extensions
More than four PSTN Lines
More than two ISDN Basic Rate Accesses
8
Advertisement
Table of Contents
